|
Post by jayphil on Feb 4, 2005 19:22:15 GMT -5
Hi,
I'm from Germany and wamt to join the forum!
My old 1990' EPS Sampler (with 2x Expander and OS 2.40) has just been reanimated after years of retiring and I'm facing a major problem: After loading the OS it's impossible to tune the keyboard. Every attempt ends up with "kbd failed - try again"... What can I do?
Thanks for help jayphil
|
|
|
Post by tbiggz on Feb 5, 2005 22:26:58 GMT -5
Are you touching the keyboard when it says "hands off"?
If not, you could open it up and make sure all the connectors are seated correctly between the processing boards and the keyboard assembly...
I wouldn't be surprised if they are loose after years of storage..
|
|
|
Post by jayphil on Feb 6, 2005 4:08:58 GMT -5
Yes, you're right.
I opened the front cover and checked the connections to the keyboard. Even if they were not loose in a visible manner the tuning is now running correctly! I have just purchased a bunch of EPS sounds on Ebay from "baysterd" (G Gebert - Fleetwood, NY). Does anyone know about this guy or had deals with him?
|
|