|
Post by Kilowax on Oct 18, 2005 6:27:37 GMT -5
Hi, yall! I have the Rack version, so it cames with the digital card installed... Prob is when i want to sample digital there's no siganl, like if the board isn't working Can someone tell me what's the deal, and could it be fixed? Thanx.
|
|
|
Post by Kilowax on Oct 19, 2005 20:31:13 GMT -5
Could a Rack user, tell me if he's able to use the digital I/O with an OS older den 3.53?
|
|
|
Post by Kilowax on Nov 1, 2005 7:32:55 GMT -5
|
|
|
Post by Centurion on Nov 2, 2005 9:43:16 GMT -5
Dunno where your assumption that ASR-10 R has Digi-board comes from. It´s like on the Keyboard, you need to have the DI-10 installed man, it´s not standard, comes just with the dummy RCA digi-jacks installed. If your Rack doesn´t tell ya´ DIGITAL in addition when you´re going thru sampling menu > INPUT DRY > INPUT FX ,then it´s simply not installed. Just want to mention that first. CHECK !
If you have knowledge that on your Rack the DI-10 is installed, you need to set to FX= OFF 44K or a 44K FX in the FX section, since this setting also affects the input sampling-rate of the DI-10, setting to 30K FX =OFF or a 30K FX will not allow you to sample via Digi-In.
Another option was, that you know it´s inside, it could be wrong installed, you may check the cabling of DI-10.
Hope that helps.
|
|
|
Post by Kilowax on Nov 3, 2005 5:45:08 GMT -5
Thanks for replying. Too bad, no DI-10 inside...
|
|
|
Post by BumpInThaNight on Nov 28, 2005 17:39:08 GMT -5
ouch Ebay?
|
|
|
Post by Kilowax on Dec 2, 2005 6:08:06 GMT -5
ouch Ebay? Nope! thats all good, i'll continue whithout Digital I/O... Just i like my gears maxed up!
|
|